6
Step 9: Posts/Frame
22
22P
You will need for this page:
Fasten
Header Assembly
to top of front
Corner Posts
through top holes using two
(2)
Stone Screws
.
2
Position
Right
and
Left Corner Posts
at the corner of the
Floor Frame
as
shown. The angled end of each
Post
must be placed on top of all four (4)
corners. Fasten the
Corner Post
to
the
Floor Frame
using two (2)
Stone
Screws
in each
Post
.
1
5284
Right Corner
Post
2
The Floor Frame
must be square
and level
or holes will not align.
(QTY: 22)
SS
Assemblies from step 2:
• Header Assembly (1)
• Rear Wall Angle
Assembly (1)
5285
Left Corner
Post
2
9912
Side Wall
Angle
2
5284
5284
5285
5285
9912
9912
Front
Rear
Wall Angle Assembly
Header Assembly
Fasten
Rear Wall Angle Assembly
to top
of back
Corner Posts
using two (2)
Stone
Screws
in each post.
3
Fasten
Side Wall Angles
to top of side
Corner Post
using two (2)
Stone Screws
in each
Post
.
4
Support the Corner Posts with
stakes or other devices until
Door Jambs are attached.
Wall Angles must face inside
building.
Side Wall Angle on top
Long leg of Rear Wall Assembly
and Side Wall Angles faces
down.
Leg of Header Assembly
to inside of building and
faces down.
