background image

3

1.  

Do not touch heated nozzle area of glue gun 
or melted glue

. Touching any heated portions of the 

product may result in personal injury, such as a burn.

2. 

 Keep work area clean and keep electrical 
contacts clear of debris. Work environment 
should be clean, dry, well lit and clear of 
flammable materials.

 Cluttered, dark areas and 

flammable materials may result in a risk of fire, electric 
shock or personal injury.

3.  

Keep children and bystanders away while 
operating the tool. 

Distractions can cause you to lose 

control.

4. 

 Always use safety glasses.

 Following this rule will 

reduce the risk of eye injury.

5.  

Do not harm the cord. Never use the cord for 
carrying, pulling or unplugging the glue gun 
tool. Keep cord away from heat, oil, sharp 
edges or moving parts.

 Damaged or entangled cords 

increase the risk of electric shock.

6.  

Glue gun tool plugs must match the outlet. 
Never modify the plug in any way. Do not use 
any adapter plugs with earthed (grounded) 
glue gun tools.

 Modifying plug and failure to use 

proper outlet increases risk of electric shock.

WARNING

 When using electric tools, basic safety precautions should always 

be followed to reduce the risk of fire, electrical shock and personal injury.

CAUTION:

 Read Safety Rules and Operating Instructions Carefully.

READ ALL SAFETY INSTRUCTIONS:

7.  

Avoid body contact with earthed or grounded 
surfaces such as pipes, radiators, ranges and 
refrigerators.

 There is an increased risk of electric shock 

if your body is earthed or grounded.

8. 

Disconnect tools when not in use.

9.  

Do not touch the glue stick or trigger except to 
dispense glue.

 If you insert the glue stick into the glue gun 

using too much force can cause hot glue to unexpectedly 
discharge from the nozzle. Following this rule may reduce 
the risk of accidental glue discharge.

10.  

Do not expose this tool to rain or wet conditions.

 

Water entering a corded electric tool will increase the risk 
of electric shock.

11.  When not in use, 

the tool should be stored indoors.

12.  

Store idle glue gun out of the reach of children, 
and do not allow persons unfamiliar with the 
tool or these instructions to operate the glue 
gun.

 Electric tools are dangerous in the hands of untrained 

users.

13.  

Do not pull glue sticks from gun.

 The feed 

mechanism may become damaged or impaired. If you 
desire to change types of glue, cut off protruding end of 
glue stick and feed the remainder through with the new 
type of glue stick.

GENERAL TOOL SAFETY WARNINGS

Summary of Contents for GT30LI













Reviews: