background image

4

SAFETY PRECAUTIONS:

 

WARNING!

•  Do not touch heated nozzle or melted glue –  

touching any heated portions of the product may result  
in personal injury, such as a burn. Operating temperature 
of the nozzle is 380˚F (193˚ C).

•  When glue is hot do not lay glue gun on its side always 

use stand.

•  Property damage and personal injury may result from 

extended contact with tip of hot glue gun.

•  Place the glue gun in the upright position when idle using 

the base stand provided.

• Do not leave unattended.
•  For general indoor household use only and should not be 

used for outdoor or industrial purposes. 

• Do not use near water, liquids or rain.
•  Do not use this product in areas where the risk of explosion 

is present.

•  USE ONLY RECOMMENDED ATTACHMENTS. Use of an 

attachment not recommended or sold by the manufacturer 
may result in a risk of fire, electric shock or personal injury. 

•  UNPLUG POWER CORD when not in use. 
•  Turn off glue gun by placing the switch to the OFF  

position and unplug charging stand when not in use.

• Allow glue gun to cool before storing.
•  Do not try to remove unused portion of glue sticks from 

glue gun after use.

•  Do not use a damaged glue gun.
•  Do not disassemble or attempt to repair this appliance – 

service must be performed only by an authorized 
service representative.

•   Children shall not play with appliance. However, this 

appliance can be used by children aged 8 and above, as 
well as by person with reduced physical, sensory or mental 
capabilities, provided that they are supervised and are 
instructed about using the appliance in a safe way and 
understand the hazards involved. 

•  Cleaning and user maintenance shall not be made by 

children without supervision.

• Keep away from children under the age of 8 and animals.
•  Do not carry the tool by the cord or pull cord to disconnect 

it from the outlet.

•  If the supply cord is damaged, it must be replaced by the 

manufacturer, its service agent or similar qualified persons 
in order to avoid hazard.

•  Recharge the power tool only with the charger specified 

by the manufacturer. A charger that is suitable for one type 
of power tool may create a risk of fire when used with 
another power tool.

•  Under abusive conditions and extreme temperature, liquid 

may be ejected from the battery; avoid contact. If contact 
accidentally occurs, flush with water. If liquid contacts eyes, 
seek medical help. Liquid ejected from the battery may 
cause irritation or burns.

•  Do not store tool in locations where the temperature 

may reach or exceed 104°F (40°C). Extended periods 
of extreme heat may cause damage to the battery and 
possible fire. 

•  Do not dispose of the tool by incineration. The batteries 

may explode in fire.

GENERAL TOOL SAFETY WARNINGS

Summary of Contents for GT30LI













Reviews: