7
OPERATION
1. Insert glue stick into glue stick opening at rear of tool.
2. If desired, extend retractable drip pad at front of charging stand.
3. To turn the glue gun on, press and hold ON/OFF switch until temperature indicator lights up green. The temperature
indicator will remain green when glue gun has reached proper working temperature.
4. Allow glue to melt inside heat chamber for one minute before attempting to use.
5. To glue, pull the trigger to regulate glue flow and apply as needed. Do not force trigger if glue does not enter gun
easily. If this occurs, allow an additional thirty seconds of heat up time. Use caution to avoid hot nozzle and glue as it
can cause burns.
6. Release trigger to stop the flow of glue. Apply pressure to work piece for approximately sixty (60) seconds
for complete bonding.
7. T o turn the glue gun off, press and hold ON/OFF switch until temperature indicator goes off. Place used glue gun down
carefully and allow to cool before storage.
NOTE:
Glue gun is equipped with an automatic safety shut-off feature that switches off after 10 minutes. To reactivate,
simply turn gun back on.
OPERATING INSTRUCTIONS
Summary of Contents for GT30LI
Page 1: ...PMGT30LI 8 Rev 07 18 Arrow GT30LI Cordless Glue Gun GT30LI...
Page 11: ...11...