Arrow GT30LI, Manual

8

DISPOSAL

Improper disposal of obsolete lithium ion batteries is unsafe and can cause environmental damage. Please dispose of 
this product via an approved waste removal company or your municipal waste disposal authority. Contact your local 
municipality for regulations in your area.

TIPS ON USING

1.  The working time of hot melt glue can be extended to fifty to sixty (50 to 60) seconds by applying the adhesive in large 

drops (1/2” diameter) or shortened to less than ten (10) seconds by extruding the adhesive in a thin line.

2.  Large areas are difficult to bond because the adhesive frequently will harden before you have extruded the right amount.
3. Preheat surfaces, (especially metals) to improve bond strength. Direct sunlight will accomplish this.
4. The adhesive remaining in an unheated glue gun will re-melt upon heating.
5. Do not use on items that will be subject to temperatures above 140˚F (60˚C).
6. Do not use hot melt glue to hold heavy loads.
7. Some paints and stains can weaken the adhesive. You may need to paint or stain before gluing.

OPERATING INSTRUCTIONS