ASSEMBLY AND OPERATION
Work with the complete surface of the sandpaper, not only
with the tip.
Scraping
Install a scraping blade at an angle easy to use. Start the
tool and allow it to reach full speed. Use light pressure and
a low angle to avoid gouging and damaging the workpiece.
Scraper blades are suitable for removing vinyl, varnish, paint
layers, carpeting, caulk, and other adhesives.
Use a rigid scraper blade to remove harder materials, such
as vinyl flooring, carpeting and tile adhesives in a large
area.
Use a flexible scraper blade to remove softer material such
as caulk.
WARNING
To reduce the risk of explosion, electric shock and
property damage, always check the work area
for hidden gas pipes, electrical wires or water
pipes when making blind or plunge cuts.
MAINTENANCE
Inspect your tool for issues such as undue noise,
misalignment or binding of moving parts, breakage of parts,
or any other condition that may affect the tool operation. To
prevent accidents, always unplug the tool from the power
source before cleaning or performing any maintenance.
Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
The OSC9500-A tool is virtually maintenance free. Keep tool
clean and free of dust. Wipe clean with a dry cloth; do not
use harsh chemicals to clean. The OSC9500-A tool contains
no user serviceable parts. In the unlikely event that your tool
should need service contact:
Arrow Fastener Co., LLC
271 Mayhill Street
Saddle Brook, N.J. 07663
Tel. 201 843-6900
10
