DL210 Operation Manual V3.2
9
4.
Registering Fingerprints
4.1.
Hint: In order to register fingerprints, the operator will be operating
buttons and the scanning window on both sides of the lock. By
becoming familiar with the location of buttons as shown in Figure 1,
as well as the sequence of operations, the operator will more easily
accomplish the registration without being “timed out” as mentioned
above.
4.2.
On the
Outside
, you will slide up the dust cover and use the
Power
On
button and the fingerprint scanning window.
4.3.
On the
Inside
, you will be using the
STOR
,
DEL
and
Z
(Select)
buttons.
4.4.
On the first two registrations, there is no need to assign management
levels as they will be Administrators automatically, but on subsequent
registrations, have in mind what level you wish to assign and the
range of ID numbers defining the levels. (Review Para. 2.6 above.)
4.5.
Hint: Before starting the procedure for registration, decide on what
finger you wish to use and practice placing the finger onto window in
the same way you intend to open the door later. Practicing will give
you a feel for the window and how to put the center of your vortex
onto the center of the window.
4.6.
Procedure for registering first Administrators:
4.6.1.
Slide open dust cover
4.6.2.
Press
Power-On
button (Outside) (hear one long beep)
4.6.3.
Press and hold
STOR
(Inside) for about 3 seconds until a long
beep
