DL210 Operation Manual V3.2
12
6.
Display
6.1.
The LED displays different information depending on if you are in a
pure display mode or if you have just finished a programming
function such as registering fingerprints.
6.2.
When in the Programming Mode, immediately after registering
fingerprints, you can press the Select button and see the NEXT
AVAILABLE IDs of the three categories of people: Administrator,
Supervisor or User. For example, if you have two Administrators and
three Users already registered and you just finished adding a fourth
User, pressing the Select button will show: 15 – 3 – 5
6.3.
In the pure Display mode, you can verify the ID of the person who
just unlocked the lock. Immediately after a fingerprint verification,
press the Select button. The Display will then show the entering ID,
alternating with the remaining number of available spaces in the lock
memory. For example, if there are two Administrators and the last of
four Users just entered, the display would show: 04 – 44
7.
Registering additional fingerprints
7.1.
After the first two fingerprints are registered as Administrators,
additional fingerprints can be registered by any Administrator (or
Supervisor.)
7.2.
The Administrator should advise the new registrant on the proper
method of placing the finger in the scanning window and the
sequence of steps per Section 4.5 and 4.6 above
7.3.
The Administrator should know what level he/she wants to assign to
the new registrant. (Review Section 2.6)
