36
CHAPTER 5 - Transport and Installation
FlexiBowl® - Models 200 - 350 - 500 - 650 - 800
5.1
Packaging
The machine is shipped by ARS S.r.l.
from the production factory to the Customer’s premises.
Based on the distance to be transported, on the specific requests from the Customer, and on how long the load will remain in the
packaging, the machine will be shipped in the following ways:
•
normal protective packaging for short and medium distances;
•
special protective packaging for long distances.
It must be shipped using closed or curtain-sided vehicles depending on the type of load.
When the machine is received, it is mandatory for the customer to check that there is no damage caused by the mode of transport
or by the personnel in charge of the specific operations.
•
If any damage is discovered, leave the packaging in question as it was found and immediately ask the competent shipping
company to assess the damage; afterwards, send a damage report to inform the transport company’s
insurance company
and the point of sale of the discovered damage.
•
If the machine is delivered in a crate on a pallet or on wooden planks protected by heat-shrink cellophane, first remove the
packaging or the cover. To completely free the machine, remove the screws and the metal strapping. Then lift the machine
with a crane or forklift truck as described in the table and remove the pallet used for transport.
5.1.1
Table of units and weights - with packaging
Follow the table below for the weights and dimensions including packaging.
Specification
Flexibowl® 200
Flexibowl® 350
Flexibowl® 500
Flexibowl® 650
Flexibowl® 800
Gross weight (with
packaging)
35 Kg
42 kg
59 Kg
86 Kg
103 Kg
Wooden crate
dimensions (mm)
700x700x500
700x700x500
700x700x500
1000x1000x500
1000x1000x500
