38
CHAPTER 5 - Transport and Installation
FlexiBowl® - Models 200 - 350 - 500 - 650 - 800
5.1.3
Removing the packaging
Proceed as follows to remove the packaging:
Step
Action
1
Put the machine in its intended place.
2
Unscrew the Flexibowl® from the base of the wooden crate used for shipping.
3
Take the USB device and the test file out of the crate. Keep them for future use.
4
Use the side handles on the Flexibowl® to lift it out of the crate.
CAUTION!
2 operators are needed to manually lift the Flexibowl®
out of the wooden crate.
To handle the machine and/or its parts, see the “
Transport and handling
”
section.
5.1.4
Disposing of the packaging
The packaging is an integral part of the supply and is not collected, hence it must be disposed of by the buyer.
Any disposal or destruction must be carried out in compliance with the regulations in force in the
user’s country, taking into
account the nature of the materials:
•
wood for the crates;
•
plastic sheet to protect the machine and adhesive tape to secure the plastic;
•
moisture absorber sachets;
•
etc.
