Micro-Serration
dial nut
Functional features
The cutting blades are
provided with a
"Micro-Serration" which is
unique to ARS. The finely
corrugated edge part serves to
protect the fabric from stress,
allowing for excellent cutting
efficiency to be achieved.
Special "Micro-Serration"
To adjust the dial nut, open the
cutting edge on one side with
the scissors held with one
hand, and drop it out naturally.
Then, adjust the dial nut so
that the cutting edge is
stopped right before it is
closed naturally as shown in
the figure. If the cutting edge
is tightened insufficiently, it
may be loose and rattle,
resulting in inferior cutting
efficiency, or a reduction in
levering, causing the
life of the cutting edge to be
shortened. It is not also
recommen.
ded to tighten the cutting edge
excessively. In these respects,
the adjustment should be
performed carefully.
Note: (It has beer, adjusted to
the best position at the
factory.)
Adjustments of dial nut (utility model pending)
