After-sales Service
- The KEVLAR EATER will be
assured of optimum cutting
efficiency for a long time as
long as it is used in
accordance with the
precautions described in this
manual.
- Should the KEVLAR EATER
fail in its cutting efficiency and
become impossible to utilize
continuously, send it back to
ARS, freight prepaid with your
name, address and a short
letter describing the problem.
We will restore the cutting
edge and anything else to its
prior condition sending it back
to the user. (with charge)
Lubrication (accessory)
To allow the KEVLAR EATER to last for a long time, it is advised to
perform regular maintenance by using lubricant oil.
• Be sure to apply a drop of oil to the
support points prior to using the
KEVLAR EATER.
• Wipe the cutting edge meshing part
with a piece of cloth dampened in oil.
• After using the unit, wipe it with a
piece of cloth, etc.dampened with a
few drops of oil, for prevention of
rust,prior to storage.
• Make it a rule to keep it stored in
place out of the reach of children.
drops of oil
