R74020 | Rev A | 11/22/2021 | Copyright 2011 Armored Works, LLC
Page 2 of 17
Section 1:
Tools & Notes on Installation
Tools Required:
This list is the recommended tools for ease of installation. Other versions of the same tool can be used. For
example, Allen Wrenches instead of Allen Drive Sockets.
HOW TO USE THIS GUIDE:
The installation guide contains ALL steps for installation. Please read and follow the instructions
in order of each page top to bottom and left to right.
Jeep Model:
Instructions may apply to multiple Jeep models but are labeled separately where appropriate (i.e. TJ vs. LJ).
Options:
Because of the number of component options we offer, these instructions may contain steps that will not match
your configuration. You can skip these steps.
Images:
Pictures are provided, and parts are labeled throughout the instructions. Each text box contains guidance based
on the pictures next to it. The text will refer to alphabetical labels (A, B, etc.) found in the images.
Installation Notes:
Terms may be used in the body of the instructions that you may not be familiar with, if you have any
questions feel free to contact us at the number below, or email techhelp@metalcloak.com
QUESTIONS: Any questions or comments about the instructions? Call us at 916-760-4575 M-F 7:00 AM
–
5:00 PM PST.
5mm Allen 5/32 Allen
7/32” Allen 1/4” Allen
Socket Wrench
Cutters
Dremel & Cut-Off Wheel
1/2” Socket & 9/16” Socket
1/2” , 3/8”, 11/16” Wrench
T40 Torx Socket
13/32” Bit 17/32” Bit
5/16 Bit
Drill
Blue Lock Tight
Clamps
