C
R74020 | Rev A | 11/22/2021 | Copyright 2011 Armored Works, LLC
Page 4 of 17
Section 3:
Installation Instructions
Step 1:
Front Hoop Bracket Installation
A. Using a T40 torx wrench remove the four stock torx bolts from the
side panel and hood cowl.
B. Remove the side panel.
C. Using cutters remove the plastic tab underneath the hood cowl.
D. Using a dremel enlarge the T40 torx holes on the hood cowl
making sure they are large enough to fit the upper bracket’s 1/2”
standoffs. Do NOT use a drill to open the holes.
A
1
4
2
3
B
D