Art Lighting Production WL 150 DIM, User Manual

WL 150 DIM / USER MANUAL / ENGLISH

8

03

2.6  SERVICE MENU

You can enter the service menu either from DMX channel 511 by holding down the but-

ton UP or from the channel 1 by holding down the button DOWN. The difference is only 

in the speed of the access to the desired function because from the channel 511 you will 

reach the beginning of the chained functions and from channel 1 the end of the chained 

functions.

BEGINNING (CH511 “hold down button UP”) - 7.c.1; 6.c.0; C.30……… C.01 – END (CH1 

“hold down button DOWN”)

Use of the equipment:

The luminaire WL-150 DIM is designed for 

the working and stage/studio lighting of the 

interiors.

Protection against electric shock:

The metal parts of the spotlight are conduc-

tive interconnected and the fixture is con-

nected by a terminal to the protective sys-

tem of the network.

The luminaire has the protection class of 

IP 40, which ensures sufficient protection 

against contact with live parts, but it does 

not protect your luminaire against ingress of 

water into the luminaire. The luminaire is not 

designed for use in outdoor or wet areas.

The connection and putting into operation of 

the fixture should be made only by qualified 

electrical technicians by course of the regu-

lation 50/78 Col.

Installation, assembly:

Installation, assembly:

The luminaire is equipped with yoke with 

screw holes for M10 screws. It is assumed 

that one of the luminaire holders will be at-

tached with screws M 10 to the luminaire 

yoke or that the luminaire will be attached 

by means of screws directly to the structure 

or to the wall.

The safety standard for the luminaires re-

quires additional fall protection, for this pur-

pose the luminaire is equipped on the sides 

with two holes. Through these holes a safe-

ty cable is run, which must be attached to a 

fixed structure.

The power supply is secured with a mov-

able lead cable - flexible cable 3 x 0,75 

mm2, length 1,5 m, equipped with a plug 

of a Schuko type. On the luminaire sides are 

locking nuts enabling setting of the fixture in 

the required working position.

Operation:

Because the fixture is at the same time a 

heat source, it is necessary to secure the 

heat dissipation (e.g. by due space in which 

the fixture is used).

OTHER INSTRUCTIONS