Art Lighting Production WL 150 DIM, User Manual

WL 150 DIM / USER MANUAL / ENGLISH

5

02

PRODUCT DESCRIPTION

DEFAULT SETTINGS

2.1  DEFAULT DMX CHANNELS

The DMX channels in a standard setting

DMX

FUNCTION DESCRIPTION

FUNCTION

1

Dimming 0–100%

active

2

0% - halogen dimming, 1-99% - Strobo, 100% - LED dimming

inactive

The luminaire is by default set as one channel device with active working light func-

tion (worklight). Only the intensity is controlled!

According to the above DMX table it is apparent that the luminaire may also have two 

DMX channels. The second DMX channel may be activated by the user himself or the 

user can ask his supplier to activate the second DMX channel already when purchasing 

the luminaire.

2.2  WORKLIGHT FUNCTION

If the Worklight function is active (default setting), then the luminaire will light up to 

100 % when connected to the electric power mains. ATTENTION! For a period of 1-2 

seconds when connected to the 230V electric power mains the luminaire does not re-

spond (charging of the electronics) and then gently starts up in a time of 1 second. If 

you want to dim the luminaire continuously, then connect to the input XLR connector 

the DMX signal. As soon as the luminaire detects the DMX signal then it turns off (if no 

DMX values available) or changes to the set level, which is sent to by an external DMX 

controller. From this moment on you can continuously dim the luminaire by the external 

DMX controller from 0-100 %. If you interrupt the DMX signal, or you switch it off, then 

the luminaire will start again to behave like an ordinary unregulated working light.

If the Worklight function is switched off, then the luminaire will do nothing after connec-

tion to the electric power mains. It is waiting to get some value on its DMX channel and 

according to this value it responds. In practice this means that without a source of DMX 

signal the luminaire can not be lighted up.