Art 4x4 Series, User Manual

6 

OPERATION 

MAXIMUM LOAD 

The eight circuit breaker protected outlets are rated at 15 amps, which is equivalent to 1800 watts at 
120 volts.  If the total load on the 

4x4 POWER DISTRIBUTION 

Unit's outlets (and rack lights on the 

SP & PS) exceed 15 amps, the circuit breaker will trip, cutting off power to your rack.  If this happens, 
reduce the load by unplugging one or more units from the 4X4 POWER DISTRIBUTION UNIT.  Then 
push the circuit breaker button in to reset it. 

LED LAMPS  (SP & PS) 

The 

4x4 POWER DISTRIBUTION 

Unit's lamps pull out easily and may be aimed to provide the best 

illumination for your equipment. Adjust the DIMMER control for the desired brightness.  The lights do 
not turn off automatically when the tubes are pushed in, so be sure to switch the RACK LIGHTS 
switch to the OFF position before pushing in the tubes.

POWER SWITCHES 

The 

4x4 POWER DISTRIBUTION 

Unit's has a master POWER switch for the rear outlets as well as 

the lights (SP & PS).  This switch glows when the unit is on.