11
SPECIFICATIONS
Input Connections
XLR, 1/4” TRS, balanced
Output Connections
1/4” TS, unbalanced
Frequency Response
10Hz to 40kHz, +0/-0.5dB
Crossover Frequency Range
250Hz to 6kHz
Subwoofer Frequency Range
50Hz to 250Hz
Crossover Filter Type
Fourth-order Linkwitz-Riley, 24dB/octave
Subwoofer Filter Type
Two-pole Butterworth, 12dB/octave
Dynamic Range
>114dB
Signal to Noise Ratio
>95dB, Ref: 0dBu, 20Hz-20kHz, unweighted
Input Impedance
100k Ohms
Output Impedance
220 Ohms
Maximum Input Level
+21dBu
Maximum Output Level
+21dBu
Total Harmonic Distortion (THD)
<0.01% (20Hz-20kHz, 0dBu)
Maximum Gain
+4dB
Power Requirements
110-125V AC, 50-60hz, 15W (USA)
Export units configured for country of destination
Dimensions (HWD)
1.75” x 19” x 5”
44mm x 483mm x 127mm
Weight
6.2 lbs. (2.8 kg)
ART maintains a policy of constant product improvement. ART reserves the right to make changes in
design or make additions or improvements to this product without any obligation to install these
changes on products previously manufactured. Therefore, specifications are subject to change
without notice.
