30
#
Name
Description
1
VGA Input
Connect the B3D Computing Unit to this input
2
VGA Output
Connect the VGA display to this output port using VGA
connector inside B3D BM pole
3
Brightness Trim Pot Control
Adjusting this control will brighten or dim the output video.
4
Receiver RJ-45 Input
Connect a CAT-5e cable (terminated according to the
TIA/EIA-568-
B specification) between the sending and
receiving units
5
5V DC Power Supply Input
Connect the included 5V DC power supply to this input.
6
Sender RJ-45 Input
Connect a CAT-5e cable (terminated according to the
TIA/EIA-568-
B specification) between the sending and
receiving units.
Table 10.
VGA Extender’s electrical connections
5.7.4. VGA Extender characteristics
Parameter
Value
Ethernet line distance, up to
100 m
Signalling rate
480 Mbit/s
Dimensions, HxDxW
93x46x35
Weight
0.15 kg
Power consumption
5 VDC @ 5 W
Operating temperature
15
–
30
0
С
Operating humidity
15% - 80% non-condensing
Table 11. VGA Extender characteristics
5.7.5. DVI-VGA converter
DVI-VGA converter should be installed in the Computing Unit DVI-I port in order to provide connection
of Extender’s VGA cable.
FIG 29. DVI-VGA converter
