45
FIG 57. Attaching special metal to the monitor bracket with two screws
FIG 58. Fixing the monitor on the plate using four M4 screws.
FIG 59. Connecting power cord and VGA cord to the monitor
6.3.2. Electrical Connections
B3D BM electrical connections should be performed according to B3D BM electrical connection diagram
shown on Figure 3.
B3D BM electrical connection should be performed in the following sequence:
Connect B3D BM Recognition Unit to Computing Unit using UTP cat.5 cable (or Ethernet patch-
cord that comes as a part of Recognition Unit package).
Connect Computing Unit to LAN with a UTP cat.5 cable.