Sensor Melody Light Robot
17
Install the software from the URL below to setup
the
Studuino Programming Environment.
★ Proceed to Step 1 when software installation is complete.
http://www.artec-kk.co.jp/robotist/
Remove the USB cable from the Studuino unit.
Open the downloaded file.
Making Your Sensor Melody Light Robot Run
http://www.artec-kk.co.jp/studuino/
Download the program file
SensorMelodyLightRobot̲1.ipd
from the URL
below in the
Robotist
section.
②
Connect the USB cable to the PC and the Studuino unit.
Refer to
1.3 Studuino
in
Studuino Programming Environment Manual
for more details.
①
⑤
③
④
Transfer the program to
the Studuino unit by clicking
the Transfer button .