36
Image Spot 100
Product code: A0690100
Gently press the retainer spring as flat as possible against the back of the gobo using a small
flathead screwdriver or similar.
Place the gobo holder back into the gobo assembly and snap it into position.
Replace the head cover and tighten all 4 screws.
Gobo Size
Glass Gobo
Metal gobo
Fig. 18
Glass Gobo Orientation
Coated glass gobos are inserted with the coating against the rim of the holder (away from the spring).
Textured gobos are inserted with the smooth side against the spring. This provides the best results when
combining rotating gobos.
Coated side
Uncoated side
When an object is held up to the coated side,
there is no space between the object and its
reflection. The back edge of the gobo cannot be
seen when looking through the coated side.
When an object is held up to the uncoated side,
there is a space between the object and its
reflection. The back edge of the gobo can be
seen when looking through the uncoated side.
