Ordercode: A0720068/A0720069/A0720070
Amaro 10W COB LED IP65
Operating Determinations
•
This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
•
The minimum distance between light output and the illuminated surface must be bigger than 1
meter.
•
The maximum ambient temperature t
a
= 40°C must never be exceeded.
•
The relative humidity must not exceed 50 % with an ambient temperature of 40° C.
•
If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
•
Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others !
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
•
If the projector is lowered from the ceiling or high joists, professional trussing systems have to be used.
•
Use a clamp to mount the projector, with the mounting bracket, to the trussing system.
•
The projector must never be fixed swinging freely in the room.
•
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
•
When rigging, derigging or servicing the projector, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.
4
