background image

xii

 

IL6000 Chassis Installation and Operations Manual

 

 

About This Manual

This manual provides instructions for installing, configuring, and operating the IL6000 chassis.

Audience

This manual is intended for the following trained and qualified service personnel who are responsible for 

installing and operating the IL6000 chassis:

• 

System installer

• 

Hardware technician

• 

Artel Customer Support

Related Documentation

The following documentation contains material related to the IL6000 chassis:

Document

Provides . . .

InfinityLink Media Transport Solution Data 
Sheet

Product operating and environmental specifications, and regulatory 
conformance information for the chassis.

InfinityLink Manager Setup and Operations 
Manual

Information about accessing and using InfinityLink Manager to 
configure and monitor function modules.

Function Module Installation and 
Operations Manuals

Module-specific manuals that provide module overview, configuration, 
and operation information.

Function Module Quick Start Guides

Module-specific quick start guides that provide module configuration 
and operation information.

Function Module Data Sheets

Module-specific documents that provide module operating and 
environmental specifications, and regulatory conformance 
information.

Summary of Contents for InfinityLink IL6000




































Reviews: