21
SPA/TEMPERATURE OPERATION
Light: First Press of the select will turn on the lights. A second
press of the select button will turn the lights off. The Island Spas
lighting systems have diffe rent modes. To cycle through the dif-
ferent modes you must turn the light on and off, once the desired
mode is selected, leave the light on. If the light is not manually
turned off it will automatically timeout after 240 minutes.
Invert: Inverts the display to be viewed from outside the spa or
inside the spa.
Temperature Operation
Temperature Up Button: The temperature up button will increase
the set point temperature
Temperature Down Button: The Temperature down button will
decrease the set point.
Temperature Range: The Temperature Range is displayed in the
upper Right Hand corner of the display. This indicates what the
range of the set point can be. Please see the section on adjust-
ing setting to change the Temperature Range.
High Range: Set point can be set between 80°F and 104°F
Low Range: Set Point can be set between 50°F and 99°F
