43
JET CARE
We recommend that you clean your jets when you drain your spa.
However, if you do need to clean your jets in between this can be ac-
complished with a full spa.
1) To remove the jet inserts
turn the jet counterclockwise
until it stops.
Continue to turn the jet past
the stop point to loosen it from
the spa.
The insert will now pull out.
2) Soak jet inserts in a mixture
of 1 part vinegar to two parts
warm water for 2-3 hours.
Periodically rotate the spinner
nozzle to break up residue in the jets.
3) Rinse the jet inserts
with a standard garden hose.
4) To reinstall the jets, insert
jet into jet body and turn
clockwise until fully seated then
tug to make sure it is seated
properly. You can then continue
to turn clock-wise until it stops.
NOTE: A jet with stainless steel escutcheons can be slippery. You
can use a soft cloth or jar-opening pad to assist in removing and
installing the jet.
MAINTAINING YOUR SPA
