GENERAL MESSAGES
Most messages and alerts will appear at the bottom of the normally used
screens.
Several alerts and messages may be displayed in sequence.
Some messages can be reset from the panel. Message that can be re-
set will appear with a “right arrow” at the end of the message. This mes-
sage can be selected by navigating to it and pressing the select button.
– – –°F – – –°C
Water Temperature is Unknown
After the pump has been running for 1 minute the water temperature will
be displayed.
Possible freezing condition
A potential freeze condition has been detected. All water devices are
activated. In some cases the pump may turn on and off and the heater
may operate during Freeze Protection. This is an operational message,
not an error code.
The water is too hot – M029
The system has detected a spa water temperature of 110°F (43.3°C)
or more, and spa functions are disabled. System will auto reset when
the spa water temperature is below 108°F (42.2°C). Check for extended
pump operation or high ambient temperature.
36
