17
OPERATION OF TROPIC SEAS
Example of various menus include:
While the Temperature is
still flashing, press Light
FILL IT UP
PREPARATION AND FILLING
Fill the spa to its correct operating level. Be sure to open all valves and
jets in the plumbing system before filling to allow as much air as possible
to escape from the plumbing and the control system during the filling pro
-
cess.
After turning the power on at the main power panel, the top-side panel
display will go through specific sequences. These sequences are normal
and display a variety of information regarding the configuration of the hot
tub control
PRIMING MODE – M019*
This mode will last for 4-5 minutes or you can manually exit the priming
mode after the pump(s) have primed.
Regardless of whether the priming mode ends automatically or you manu-
ally exit the priming mode, the system will automatically return to normal
heating and filtering at the end of the priming mode. During the priming
mode, the heater is disabled to allow the priming process to be completed
without the possibility of energizing the heater under low-flow or no-flow
conditions. Nothing comes on automatically, but the pump(s) can be
The menus can be exited with certain button presses. Simply waiting for
several seconds will return the panel operation to normal.
