background image

950-0052-01r0_fmt_en-US 

 

 

 

 

 

 

 

 

4 of 20 

1.0

 

Introduction  

 

It is recommended that personnel study this 
manual before utilizing 

Synergy

HD3

 

Cable 

Kit, Arthrex Pump and Shaver. The safe and 
effective use of this system requires the 
understanding of and compliance with all 
warnings, precautionary notices, and 
instructions marked on the product, and 
included in this manual.  

 

1.1 

Intended Use  

 

The 

Synergy

HD3

 

Cable Kit, Arthrex Pump 

and Shaver is intended to provide display of 
selected information from the AR-6480 
[Pump], AR-8305 [Shaver], AR-9800 [Apollo 
RF], and AR-3290-0004 [Insufflation] on the 
periphery of the surgical monitor. 

Display of auxiliary device settings on the 
surgical monitor allows the surgeon to view 
these settings at any time in the procedure. 

 

1.2 

Contraindications 

 
Not intended to Control any aspect of the 
Pump or the Shaver.  
 

 

1.3 Warnings and Precautions  

 
The words 

WARNING

PRECAUTION

, and 

NOTE 

carry special meanings and they should 

be read carefully. 
 

 

WARNING:  

The safety and/or health 

of the patient, user, or a third party is 
at risk. Comply with this warning to 
avoid injury to the patient, user, or 
third party.  

 

PRECAUTION: 

This contains 

information concerning the intended 
use of the device or accessory. 
Damage to the equipment is 
possible if these instructions are not 
followed. 

 

NOTE: 

A note is added to provide additional, 

focused, information. 
 

1.3.1 

WARNINGS 

 

 

 

Prior to use, read the entire Arthrex, 
Inc. Synergy

HD3

 System [950-0027-

XX] video instruction manual before 
use during surgical procedures.  

 

Prior to use, read the entire AR-6480 
[Dual/Wave Pump Console], AR-8305 
[Shaver], AR-9800 [Apollo RF], and 
AR-3290-0004 [Insufflation] 
instructions for use before use 
during surgical procedures.  

 

Follow all warnings and cautions in 
these manuals.

 

1.3.2 

PRECAUTIONS 

 
 

 

Prior to use, read the entire Arthrex, 
Inc. Synergy

HD3

 System [950-0027-

XX] video instruction manual before 
use during surgical procedures.  

 

Prior to use, read the entire AR-6480 
[Dual/Wave Pump Console], AR-8305 
[Shaver], AR-9800 [Apollo RF], and 
AR-3290-0004 [Insufflation] 
instructions for use before use 
during surgical procedures.  

 

Follow all warnings and cautions in 
these manuals.

 

 

 

 

Summary of Contents for AR-3200-1040





















Reviews: