19
Doc.-no.: DPC310_01_EN Issue: 01/2018
OPERATION
6. Maintenance
The DPC310 contains no wearing or consumable parts. Servicing is not required.
On request, Arthur Grillo GmbH offers an annual calibration with factory certificate.
For information, please contact:
7. Warranty
Warranty and liability claims for personal and property damage are excluded if they are
caused by one or more of the following reasons:
•
Improper use of the device.
•
Improper installation, commissioning, operation and maintenance of the device.
• Unauthorized modifications to the device beyond the intended use.
• Disasters due to external influences and force majeure.
8. Troubleshooting
9. Disposal
Dispose of parts so as not to endanger human health or the environment. Follow the laws
in the country of use for disposing of electronic components and devices during disposal.
Description
Activity
Display does not show
anything
Check electrical connection
Measurement stays zero
Function test with a slight pressure increase in measu-
ring mode for differential pressure
Measuring error
Perform zeroing as described in chapter 4.5.
Error remains
Contact manufacturer
Displays shows: !
Device is in alarm state, please see chapter 5.4
Arthur Grillo GmbH
Phone: +49 21 02 - 47 10 22
Am Sandbach 7
Fax:
+49 21 02 - 47 58 82
40878 Ratingen
E-Mail: info@grillo-messgeraete.de
