ARTHUR HOLM AH10 DA, User Manual

5

Safety instructions

POWER AND EXTENSIONS CORDS

–  Use the appropriate power cord with the correct plug type
–  Do not overload wall outlets or power cords
–  Make sure the total ampere passed through a extension cord does not  

exceed the maximum allowed by the cable used

–  Do not place anything on the power cord 
–  Do not locate this product where a person may walk or trip over the cord

Wiring connected to hazardous voltage requires installation by  
qualified personnel or the use of ready-made flexible cables.

For your security, your equipment must be connected to an electrical 
outlet with grounding connection protection.

The operating electrical outlet must be in an easily accessed place.

ENVIRONMENT

– Install the equipment on an elevated, flat surface
– Install the equipment in a ventilated area
– Avoid exposing the equipment to:

Rain or water 

Excessive heat, cold or humidity 

Areas exposed to direct sunlight 

Dirty areas 

Equipment generating strong magnetic fields

– Avoid placing open containers of liquid, near the equipment
– Keep a minimum distance of 30mm in order to have good ventilation
–  Never place any sources of flames, such as lighted candles, etc above the 

device

–  If you are using the device in extreme weather conditions and / or tropical 

climates, the equipment should be installed in a room which ensures a 
reasonable level of temperature and humidity

–  To prevent damage, the equipment must be firmly anchored as per the 

installation instructions