12
AH Share
SHARE push button:
Press this button to share the local signal. The red
LED light indicates that the AH Share is sending the local image to the
HDMI loop, and all the monitors are displaying the signal. When pressing
this button again, the red LED light goes off and the monitors display the
local signal on screen.
Permanent press the
VIEW
button during 5 seconds to activate the private
mode (green LED light is on). In private mode, the monitor displays always
the local signal source selected, although a monitor activates the share
option.
VIEW push button:
Press this button to
select the local HDMI-1, HDMI-2, HDMI-
3, or loop shared input source. Four LED
lights indicate the HDMI local signal
displayed on the monitor:
- LED1: HDMI1 input signal selected
- LED2: HDMI2 input signal selected
- LED3: HDMI3 input signal selected
- LED4: LOOP IN input signal
selected. The monitor shows the
shared signal on the system
NOTE: With the VIEW button, you can
only select the input when a valid signal
is present on the HDMI input.
Summary of Contents for AHDSSA
Page 1: ...User manual AH SHARE STAND ALONE HDMI signal selection and distribution system ...
Page 2: ......
Page 4: ......
