18
AHLINK
AHlink is used to control and set up the unit.
By default, the AHlink signal on the unit is deactivated. To activate the
AHlink signal, press during 2 seconds the Up/Down microphone button
located on the cover plate, or contact close GPI2 pin to GND during 2
seconds. When the AHlink signal is activated, 5 beeps will sound inside
the unit to indicate that the AHlink signal is active.
The unit automatically deactivates the AHlink signal if there is no device
(mobile or tablet) connected for more than 2 minutes. You can also
deactivate the AHlink signal using the APP on mobile or tablet. When
the AHlink signal is deactivated, a long beep sounds indicating that the
AHlink is not longer available on the unit.
To control and set up the unit using AHlink, download AHlink from the
App Store (IOS system) or from Google Play (Android system). The App
is free. Execute the AHlink on your mobile phone.
On the AHlink App options, it
is recommended to not select
Auto Connect and select Portrait
on Orientation. To connect to
the device, select Scan for local
devices.
Summary of Contents for AHDTL
Page 2: ......