20
AHLINK
First line shows the model name of the device
SERIAL
Serial number on the unit
BEEP
A Beep will sound while pressing this button. Use this
function to identify the unit connected
BT OFF
Switch off the AHlink signal on the device. It will close
the AHlink App connection
AUTO ADJUST
Auto adjusts the speed and protection parameters.
On selecting this button the unit will open and close
several times and adjust the speed and protection
parameters automatically
MOV
Up/Down microphone
movements control
RED/GREEN/OFF
Controls the LED ring in
conference mode
AHnet ADDRESS
Configuration of the
AHnet address of the unit
TERM
Configuration of the RS422 termination. Activate
the RS422 termination only in the last unit of the
RS422 Bus
MIC
Controls the microphone
on PA mode
COMMAND
Shows the last AHnet
RS422 command received
MIC_LENGHT
Microphone length
configuration in steps.
One step is aprox. 1 cm
VER
Firmware version
MODE
Dynamic Talk working mode. PA mode is used for standard XLR3 microphones: the
microphone is controlled by the DynamicTalk and the LED ring indicates the state
of the microphone (green – MUTE/ red – TALK). In conference mode, the external
conference system controls the microphone and the LED ring is controlled using the
GPI connector
PASSWORD Access to advanced parameters configuration
Summary of Contents for AHDTL
Page 2: ......