background image

ABOUT US

The Company

Arthur Holm has its origins in the Danish furniture designer Jorgen Alex 
Jensen, who was active during the sixties and the seventies. His design 
inspiration and his concept of ergonomics have been continued by his 
family, the design force behind Arthur Holm product range. The result of 
combining Scandinavian design tradition with Mediterranean creativity, 
flexibility and emotion is a wide product range built on more than 25 years 
of craftsmanship. 

Arthur Holm offers a professional product range where tomorrow’s 
technology  is  shaped  into  valued  materials  with  design  flexibility  and 
customisation, specially created to enhance communication and 
collaboration in reception, conference and meeting areas. 

The art of customisation

Arthur Holm offers a range of ingenious products whose designs are based 
on quality materials and the latest technology. Products which endow 
meeting and conference rooms with silent, ergonomic, innovative and 
aesthetic solutions that integrate into the furniture, hang from the walls as 
works of art or are used as interactive points of information. 

The world of Arthur Holm

Arthur  Holm  offers  a  selection  of  unique,  elegant,  versatile,  flexible  and 
ergonomic products that are being used in meeting and conference 
rooms, reception areas, auditoriums and public zones of leading 
companies throughout the world. 

The numbers speak for themselves! We currently own 33 product 
patents,have presence in over 45 countries with products and solutions 
inmore than 25,000 installations. 

It will be our pleasure to work with you, designing your unique and 
personalised environment. Our broadcast electronic engineers will 
provide the latest technology while our design team will offer you the most 
exclusive appearance. 

Our team puts its heart, passion and pride in all our designs. 

Summary of Contents for DynamicCableRetract
























Reviews: