ARTHUR MARTIN AC3200AOW2, User Manual

Customer Service

If your appliance is still not working

properly after making the above checks,

contact the nearest Authorised Service

Centre.
To obtain fast service, it is essential that

when you apply for it you specify the

model and serial number of your

appliance which can be found either on

the guarantee certificate or on the rating

plate located on the external right side of

the appliance.

Replacing the lamp

The appliance is equipped with

a longlife LED interior light.

Use LED bulbs (E14 base)

only. The maximum power is

shown on the lamp unit.

WARNING! Do not remove the

lamp cover at the time of

replacement. Do not operate

the freezer if the lamp cover is

damaged or missing.

1. Disconnect the mains plug from the

mains socket.

2. Replace the used lamp with a new

lamp of the same power and

specifically designed for household

appliances (the maximum power is

shown on the lamp cover).

3. Connect the mains plug to the mains

socket.

4. Open the lid. Make sure that the lamp

comes on.

INSTALLATION

WARNING! Refer to Safety

chapters.

Positioning

This appliance can be installed in a dry,

well ventilated indoor where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance:

Cli‐

mate

class

Ambient temperature

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

Cli‐

mate

class

Ambient temperature

T

+16°C to + 43°C

Some functional problems

might occur for some types of

models when operating outside

of that range. The correct

operation can only be

guaranteed within the specified

temperature range. If you have

any doubts regarding where to

install the appliance, please

turn to the vendor, to our

customer service or to the

nearest Authorised Service

Centre.

11