11
Activation of the charcoal filter
saturation indicator:
Turn off the hood and simultaneously
press buttons
2
and
3
for 3 seconds.
The letters “
F
” and “
C
” will flash on
the display for 2 seconds, to indicate
successful activation of the saturation
indicator of the charcoal filter.
Deactivation of the charcoal
filter saturation indicator:
Turn off the hood and simultaneously
press the buttons
2
and
3
for 3
seconds. Only letter “
F
” will flash on
the display for 2 seconds, to indicate
successful deactivation of the saturation
indicator of the charcoal filter.
Temperature Alarm
The hood is equipped with a temperature
sensor which activates the motor at speed
3 in case the temperature in the display
zone is too high.
The alarm condition is indicated by the
display with the letter “
t
” flashing.
This condition remains as such until
the temperature falls below the alarm
threshold.
This mode can be quit by pressing key “
2
”.
Every 30” the sensor checks the ambient
temperature of the display zone.
Hob
2
H
ood
The hood is equipped with a function for
wireless connection with the cooktop for
automatic adjustment of the most suitable
speed. Refer to the instruction manual of
the cooktop to verify the presence and
compatibility of this function.
In the case of first connection to the mains
or abrupt disconnection from power supply
(blackout), wait 1 minute to allow the hood
to restore the connection with the cooktop.
LIGHTING
The hood is equipped with a lighting
system based on LED technology.
The LEDs guarantee an optimum
lighting, a duration up to 10 times as long
as the traditional lamps and allow to save
90% electrical energy.
Caution!
Do not look directly into the
LED light.
To replace lights, contact authorised
spare part center.
Summary of Contents for AFB9571MX
Page 17: ...LIB0124247 Ed 05 16 ...
