CHARGING INSTRUCTION
1. The appliance must be charged by an adapter with a specification of DC13V 1A .
When charging, the indicators illuminate alternately from bottom to top. And the four
LEDs will light solidly after finish charging.
2. The appliance cannot be activated for working when it is being charged.
3. The adapter with a specification of DC13V 1A must be purchased from a regular
channel.
BEFORE FIRST USE
1. Before using the product for the first time, please ensure that the battery is fully
charged and the parts that come into contact with the food shall be cleaned thoroughly.
2. This appliance is equipped with a protection switch and it can be only operated by
pressing the “Power button” for 1 second after the main body is installed well on the bowl
lid.
3. Please clean the glass bowl and blade with liquid soap and then dry them thoroughly.
The glass bowl and blade can be put into the dishwasher for cleaning. The motor must not
be immersed into the water and can be wiped with a wet cloth.
NOTE:
This set working time of the appliance for one cycle is 65 seconds. Release the
“Power button” to make the appliance stop running during working process.
HOW TO CHOP FOOD
1. Place the glass bowl on a plane and stable surface, and then install the blade on the
spindle at the bottom of the glass bowl. Do not touch the blade as it is very sharp.
2. Put the food in the glass bowl. Please refer to the
“Guide for Chopping Food”
to get
an ideal chopping result.
3. Close the bowl lid, and install the motor on the corresponding position of the bowl lid
by aligning the bumps on the bowl lid with the holes of the motor, and then make
adjustment according to the locking marks of motor and bowl lid until the motor is
locked well in position.
4. Hold and press the “Power button” to chop the food.
NOTE:
This appliance is equipped with a pulse button, please avoid running the
motor directly and continuously for more than 30 seconds. The longer the continuous
operation, the finer the texture of the food. For coarse food, please process for a short
period.
5. Please make sure that the blade has stopped rotating completely before opening the
bowl lid. Unplug and detach the motor, then grab the plastic support part of the blade
to remove it. Empty the food in another bowl and similar. Please do not use the glass
