Quick Installation Guide
2-Port DisplayPort USB Cable KVM Switch w/ Audio & Mic
Quick Reference Sheet
Command
QuickSwitch Button
Switching Software
Keyboard Hotkeys
1
Description
Select PC Port
Press the button to toggle
between the two
computers.
Right-click the KVM Switching Software icon to
evoke the operation menu, then select
whichever computer that is available for
switching.
Scroll Lock + Scroll Lock
Select PC port
Next lower PC Port
---
Right-click the KVM Switching icon to evoke the
operation menu, then select whichever computer
that is available for switching.
---
Next lower PC port
Next higher PC Port
---
Right-click the KVM Switching icon to evoke the
operation menu, then select whichever computer
that is available for switching.
---
Next higher PC port
Define Hotkey Preceding
Sequence
---
Right-click the KVM Switching icon to evoke the
operation menu, and then select Settings
(Windows) / Configuration Dialog Box (Mac OS).
---
User
–definable hotkeys sequence for computer selection
is “Ctrl +Alt+ [command key]”.
For Mac, instead of Scroll Lock key, you may use User-
definable hotkey sequence to switch.
Autoscan
---
Right-click the KVM Switching Software icon to
evoke the operation menu, then select Start
Auto-Scan to activate autoscanning.
---
Starts Autoscan
Autoscan with
Programmable Delay
Time
---
Right-click the KVM Switching Software icon to
evoke the operation menu, then select a range
of Auto-Scan Period.
---
Autoscan duration adjust to (10 ~ 60 seconds)
Stop Autoscan
---
While autoscanning, right-click the KVM
Switching Software icon to evoke the operation
menu, and then select Stop Auto-Scan to de-
activate autoscanning.
---
Stop Autoscan during scan mode
Beeper
---
Right-click the KVM Switching Software icon to
evoke the operation menu, then check the box
“Turn on Buzzer”.
---
Toggle Beeper on/off
Keep in Dock
(Mac only)
---
Right-click the KVM Switching Software icon to
evoke the operation menu, and then select
“Keep in Dock”.
---
KVM switching icon will be on the system tray of your
desktop
Open at Login
(Mac only)
---
Right-click the KVM Switching Software icon to
evoke the operation menu, then select “Open at
login”.
---
Operate Switcher Software and login
Fix Audio Port
---
Right-click the KVM Switching Software icon to
evoke the operation menu, then check the box
“Fix Audio Port at PC” and select the desired PC
port.
---
Check this option and then select the computer to fix the
audio/mic port to the selected computer. Once this option
is checked, the audio/mic port will be fixed and become
non-switchable.
Notes:
1.
Each keystroke in hotkey sequence should be pressed within two seconds. Otherwise, the hotkey sequence will not be validated.
2.
Please contact
to get the latest configuration utility.
Rev.1.0
Copyright© All rights reserved.
Articona International BV, Withuisveld 30, 6226 NV Maastricht, Netherlands, support@articona.eu
