Aport-212 User Guide
‧
13
‧
5.8 TCP Client Mode
When you use TCP client mode, you can select Remote IP, Port, when to connect and Idle Timeout as
followed.
5.9 UART Data Packing
When choosing TCP server or TCP client mode, you can decide how to pack your serial data before
sending them to TCP port. You can pack the data with time i.e. Interval Timeout, with data length, or
with delimiter character such as carriage return.
Force Length:
Pack the length of serial data before forwarding data to Ethernet port.
Interval Timeout:
the period of time to forward data to Ethernet Port.
Delimiter Character:
Wait for the Delimiter Character before forwarding data to Ethernet port.
The Delimiters are maximum two bytes Hex format ASCII code. If you use Carriage Return (CR)
and Line Feed (LF) as delimiters, you can specify 0D0A or 0d0a.
Summary of Contents for Aport-212
Page 2: ......