Aport-212 User Guide
‧
14
‧
5.10 Advanced Options
Advanced options is used to select following settings.
5.11 Web Server Settings
Enable
: Enable and Disable Web server.
Listen Port
: Web server port number (default web server is 80, if you use port 6060, you can add
port number at the end of the IP such as
http: //192.168.2.127:6060.
Idle Time
: Disconnect when no traffic and timeout.
Alive Timeout
: Send an
ack
package when timeout. If no response, disconnect the section.
5.12 TCP Command Settings
Enable:
Enable or disable TCP Command port.
Listen Port:
Port number.
Idle time:
same as Web server settings.
Alive timeout:
same as Web server settings
.
Please refer to the Appendix A for the Command set.
5.13 Serial Console and Debug Port Settings
Serial Message Enable
: Enable serial console command only or enable console and debug
message.
TCP Enable
: Enable TCP console command only or enable console and debug message.
Listen port:
Debug port number.
Summary of Contents for Aport-212
Page 2: ......