artisan Art-SB1, Care & Use Manual

6 

GAS CONNECTION - LIQUID PROPANE (LP), continued. 

NOTE: THIS APPLIES TO LP MODELS ONLY.  LP MODELS HAVE THE LETTERS “LP” IN THE 
MODEL NUMBER. 
 
NEVER CONNECT THE GRILL TO AN UNREGULATED GAS SUPPLY. 

 
Before proceeding, ensure the unit is fitted for LP gas. Connecting to an improper gas type will result in 
poor performance and increased risk of damage or injury. 
 
 
The installation of this appliance must conform with local codes or, in the absence of local codes, to the 
national fuel gas code, ANSI Z223.1a-1988. Installation in Canada must be in accordance with the 
Standard CAN/ CGA-B149.1 Natural Gas Installation or CAN/CGA-B149.2, Propane Installation Code. 
 
Manifold pressure with LP    

Operating:  10.0” W.C.   

Non-operating: 

11.2” W.C. 

L.P.  TANK REQUIREMENTS: 

 
Use only a standard 20 Lb. (5 Gal.) propane gas cylinder (18-1/4” H 
x Ø12-1/4”). The tank must be installed in the upright position. Do 
not use a dented or rusty LP tank as it may be hazardous and 
should be checked by your LP supplier. Never use a cylinder with a 
damaged valve.  The LP gas cylinder must be constructed and 
marked in accordance with the specifications for LP gas cylinders 
of the U.S. Department of Transportation (DOT). The cylinder must 
be provided with a shut off valve terminating in an LP gas supply 
cylinder valve outlet specified, as applicable, for connection type 
QCC1 in the standard for compressed gas cylinder valve outlet and 
inlet connections ANSI/CGA-V-I. 

WARNING

ENSURE THAT THE GAS 

SUPPLY HOSE DOES 

NOT COME IN CONTACT 

WITH THE GRILL BODY

REMOVE FROM BBQ 

CONNECT LP 

SUPPLY 

HOSE HERE 

PART NO. 220-0412 

1/2” NPTF TEE 

(BRASS) 

PART NO. 220-0405 

1/2” NPT X 3/8” ODF 

NIPPLE (STEEL) 

PART NO. 220-0411 

1/2” NPT X 3/8” ODF 

ELBOW (BRASS) 

GAS LINE TO 

BARBECUE 

BURNERS 

TO SIDE BURNER 

GAS FLOW TO 

SIDE BURNER