Setup Hints
9
2
Setup Hints
Please read the following section carefully as an addition to the "ES1231.1-A
ETK Interface Board" User’s Guide.
2.1
Recommended Layout when using Several ETK Interfaces
If you are using several different ETK interfaces in your ES1000.2 system,
please observe the order of installation shown in the figure below to ensure
the hardware configuration remains clear.
Slot 1 is for the system controller; otherwise you can install the boards in any
slot providing you observe the following order:
ES1201.1 slot no. < ES1200.1 slot no. < ES1231.1-A slot no.
The following is also true for the ES1200.1 and ES1201.1:
ID1 slot number < ID2 slot number
note
Please note that there must not be more than four ETK ports in the system. Fur-
ther, there can only be one ES1200.1 in the system.
ES1120.1
PC
Serial
ES1200.1
A
B
ES1201.1
A
B
ES1000.2
6...34V
ON
AUTO
UA Temp
ES1231.1
A
A
Slot 1
ES1231_1-ug-en.book Seite 9 Montag, 12. Mai 2003 12:37 12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com