PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY
PROGRAMMER MANUAL
39
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Summary OVP
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Summary Voltage
Summary Current
QUEStionable
Status
0
1
2
3
9
1 5
1 4
1 3
1 2
1 1
1 0
8
7
6
5
4
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
OPERation
Status
Not Used
2
3
0
1
14
13
12
11
10
9
8
7
6
5
4
15
Command Error
Power On
User Request
Execution Error
Device Dependent Error
Query Error
Not Used
Standard Event Status Registers
Operation Complete
ESB
RQS/MSS
MAV
Not Used
Status Byte Register
Not Used
Summary of IEEE 488.2 Status Structure Registers
2
3
0
1
7
6
5
4
2
3
0
1
7
6
5
4
E/E
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
QUES
OPER
SRQ
Error/Event Queue
Output Queue
Figure 7. A graphic representation of the status registers and their connections.
PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY
PROGRAMMER MANUAL
40
Figure 8: Status registers and related commands
The CONDit ion register is a read-only register which monitors the
present state of the instrument. The CONDition register updates in real
time and the inputs are not latched or buffered. When a condition
monitored by the CONDition register becomes true, the bit for that
condition also becomes true (1). When the condition is false, the bit is 0.
The read-only EVENt register latches any false-to-true change in
condition. Once the bit in the EVENt register is set, it is no longer
affected by changes in the corresponding bit of the CONDition register.
The bit remains set until the controller reads it. The command
*CLS
(Clear Status) clears the EVENt regist er.
QUEStionable Status Registers.
Table 4 shows the bit designations of the 16 bit QUEStionable Status
Register.
Enable
Register
Event
Register
Condition
Register
To SBR
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
