The following table shows the settings. Try out which setting works best for you.
■
Troubleshooting
No sound
-
Ensure that the mains adapter is pushed fully into the power outlet and that its cable is properly
connected to the DC IN connector on the Transmitter.
-
Ensure that the Receiver power ON/OFF switch is switched to ON.
-
The charge level of the battery inside Receiver may be too low. Recharge the battery or replace
it with a fully charged battery.
-
Ensure that the TV set, Hi-Fi system or audio component is switched ON and set to a channel
that broadcasts an audio signal.
-
Use the Volume Control on the Receiver to increase the sound level.
-
The connected audio/video equipment may not be in playback mode.
Start playback on by the equipment.
-
The Receiver output level is set too low. Adjust the volume to a suitable level.
