ArtNet-DMX Mux24
10
The channel entry occurs as decimal value from 1 up to 512. If several channels
should be controlled via input, the single values must be entered separated and with
comma.
For example a single channel with “1” or several channels with “1,4,7”.
Furthermore it is possible to specify to be outputted. In this case the channel
specifications need an =Value, e.g. “1=222” to set channel 1 to 222. If no value is
specified, 255 (100%) is outputted, the specified value must be in the range 0 to 255.
The declared valuation is assigned with * within the modes.
You can choose between the following modes:
-
Switch
(Switch)
Active:
Channels 100%*
Inactive:
Channels 0%
-
Button ON
(Button ON)
Channels will be turned on - 100%*
-
Button OFF
(Button OFF)
Channels will be turned off - 0%
-
Button ON/OFF
(Button ON/OFF)
Channels will be switched between on and off 0% / 100%*
-
Dimmer UP
(Dimmer UP)
Channels will be dimmed upwards - 0%
100%
-
Dimmer DOWN
(Dimmer DOWN)
Channels will be dimmed downwards - 100%
0%
-
Dimmer UP/DOWN
(Dimmer UP/DOWN)
Channels will be dimmed upwards/downwards,
change of direction after each loose
-
Button ON + Dimmer UP
(Button ON + Dimmer UP)
Short active:
Channels will be turned on
Long active:
Channels will be dimmed upwards
-
Button OFF + Dimmer DOWN
(Button OFF + Dimmer DOWN)
Short active:
Channels will be turned off
Long active:
Channels will be dimmed downwards
-
Button ON/OFF + Dimmer UP/DOWN
(Button ON/OFF + Dimmer UP/DOWN)
Short active:
Channels will be turned on/ -off
Long active:
Channels will be dimmed upwards/ -downwards
Change of direction after each loose
