61
7. Double click on the desired picture.
8. Click the green check to exit.
To edit an existing seal name
1. Scroll to the seal name, or scan in the barcode.
2. Make the needed changes in the lower part of the screen.
3. Click Apply, to save the changes for this seal. If you do not click Apply and then select a different seal the
changes will be lost.
4. Make sure to select the desired seal before clicking the green check box to exit this screen.
TU-11/12/15 Programming (Crimping setting window)
This includes the data for the T-unit to properly apply the terminal and inspect it via the CFM. Open this window
by clicking on the terminal icon shown on the end of the wire diagram.
Crimping setting window
New
The settings that are currently displayed are copied to a new name that you enter. When creating names for
the crimping setting generally you want to use a name that is the combination of the terminal number and
gauge of the wire being used. This is especially important when qualification is enabled because you
need to enter the crimp height and pull test for this particular wire and terminal combination.
Apply
After making changes to the settings click this button to command the machine to use the new settings.
Remove
To delete this Crimping Setting.
Search
To find a crimping setting from the list
Default data
Inserts default data for all the settings in all the tabs.