TECHNICAL SPECIFCATIONS
MODEL#
M17260
ELECTRIC VERSION
Element
specifications 200W, 110V, 48” cord,
UL approved. Hardwire Kit CSA
-
US
approved. File ref: 229718
HYDRONIC VERSION
Heat ouput
4433 BTU. ½” BSPT tappings.
Steel towel warmers should only
be used in a closed water system,
incorporating a rust inhibitor.
CARE & MAINTENANCE
A periodic
wash using warm water and a soft
cloth will retain the high quality finish
of your towel warmer for many years
to come. ON NO ACCOUNT should
any household bleaches, detergents,
abrasive polish, steel wool or similar
cleaning agents be used on this
product.
WALL FIXING
Towel warmer
brackets must be securely fastened
to either masonry, wall studs or
plywood board in accordance with
the fitting instructions.
PACKAGING
Packaged for regular
UPS type shipping.
WARRANTY
Frame 5 years
–
Heating element 5 years.
NOTE: Towel warmer
must
be installed so that electrical cord comes out
of the
BOTTOM RIGHT
of the unit.
