ARTURIA – Jup-8 V – USER MANUAL
48
4.1.7
The VCO modulator
The VCO modulator section allows adding modulations to both of the
oscillators’ frequencies (for vibrato or automatic pitch bending effects) and on
the pulse width of their waveforms.
Frequency modulation
LFO: Slider to set the level of modulation from LFO on the VCO
frequencies.
ENV1: Slider to set the level of modulation from Envelope 1 on the VCO
frequencies.
VCO 1 / VCO 2: Selector to choose either oscillator 1, oscillator 2 or both
oscillators as destinations for LFO / ENV modulation.
PWM: Slider to set the level of modulation on the VCOs’ pulse width.
LFO / M / ENV1: Selector to choose either a manual setting (via the
fader), LFO or envelope 1 as a source for the pulse width modulation.
The VCO modulator section
4.1.8
The LFO MODULATION, PORTAMENTO and BEND section
The “LFO MOD” section shows the parameters that can be modulated by the
LFO. There is a white button to activate the LFO. When it is pressed, the
modulation is activated. When it is raised, the modulation stops.
LFO MOD RISE: Knob to set the triggering time of the LFO.
LFO MOD: Chooses the destinations that can be modulated by the LFO:
o
ON / OFF switch (“VCO”)
o
ON / OFF switch (“VCF”)
VCO level: Slider to set the level of modulation from the LFO to the VCO
VCF level: Slider to set the level of modulation from LFO to the VCF
BEND: Selectors of the destinations that can be modulated by the PITCH
BEND
o
ON / OFF switch (“VCO 1”)
o
ON / OFF switch (“VCO 2”)
o
ON / OFF switch (“VCF”)
VCO level: Slider to set the intensity of the BEND modulation affecting
the VCO (From 0 To +24 semi-tones / – 24 semi-tones).
