background image

OPERATION

15

OPERATION

16

 

For grilling with the function grill and combined grill the temperature must be set to 250

       

,

 Close the oven door.

 

 

 but for the function fan and grill it must be set to a maximum of 200

℃.

 

Warning

!

When using 

 

grill function  it is recommended that the oven door is closed.         

 

 

When the grill is in use accessible parts can become hot. 

It is best to keep children away from the oven. 

Use

 

of

 

the

 

grill

The grilling process operates through infrared rays emitted onto the dish by the    

 incandescent grill heater. 

In order to switch on the grill you need to:

Set the oven knob to the  position marked grill.      

 Heat the oven for approx. 5 minutes(with the oven door shut).   

Insert a tray with a dish onto the appropriate cooking level; and if you are grilling on      

the grate insert a tray for dripping on the le

  

vel immediately below (under the grate).

Oven

 

guide

 

levels

Baking pans and accessories (oven grid, baking tray, etc) may be inserted into the oven in 

5 guiding levels. 

Appropriate levels are indicated in the tables that follow. 
Always count levels from the bottom upwards!

 

 

 

This function for defrosting

Defrost

(Rear Fan only)

Fan forced

Caution

!

When the functions with fan have been  

selected but the temperature knob is set to  

zero only the fan will be on.

With this function you can cool the dish or 
the oven chamber.

Possibility to bake at two cooking levels

simultaneously.

of the oven heating method is:
Reduction of oven heating-up time and
of the initial heating stage.

(Rear Heat+ Rear Fan)

At this function, allows the oven to be 
heating up in a forced way with the

 thermofan, which is in the central part 

 

Changing the Oven Lamp

Before any maintenance is started
involving electrical parts, the
appliance must be disconnected
from the power supply.

 

If the oven has been in use, let the 
oven cavity and the heating elements 
cool down before attempting any
maintenance.

Changing the bulb 

   

Unscrew the protective cover.  We 

   recommend that you wash and dry the 
   glass cover at this point.

   Carefully remove the old bulb and 
   insert the new bulb suitable for high 
   temperatures (300

) having the 

   following specifications: 230-240V, 
   50Hz, 25W, G9 fitting.

   Refit the protective cover.

IMPORTANT
Never use screwdrivers or other
utensils to remove the light cover.
This could damage the enamel of the 
oven or the lampholder. Remove only
by hand.

IMPORTANT
Never replace the bulb with bare 
hands as contamination from your 
fingers can cause premature failure. 
Always use a clean cloth or gloves.

Please note:

   

The bulb replacement is not covered 

   by your guarantee

l

 

 

 

l

Summary of Contents for AFC547W















Reviews: